Request Information
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).
Unit of Measure

Brands

 N/A RKI Instruments

Light Emitting Diode (LED)

 N/A 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking

Alternating Current (AC) Voltage

 N/A 100 to 240 V

Operating Frequency

 N/A 50 Hz60 Hz

Approximate Weight

 N/A 3.7 lb

Operation Temperature

 N/A 0 to 104 ºF

Non-Condensing Relative Humidity

 N/A Below 95 %

Universal Serial Bus (USB) printer port

 N/A A type: Connects SDM-6000 printer (SII, DPU-S245) via USB Cable

RJ-45 Connector

 N/A Ethernet Port for a Local Area Network (LAN) Connection

Secure Digital (SD) Card Slot

 N/A Compatible with Secure Digital (SD) Cards Secure Digital High Capacity (SDHC) Cards

Joint Connector

 N/A Connecting SDM-6000 (Max 10 units) and SV-3

Number of Inlet

 N/A 4

Type of Inlets

 N/A AIR GAS 1 GAS 2 GAS 3

Industry Standards/Certifications

 N/A European Conformity (CE) Marking

Standard Functions

 N/A Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instrument

Software

 N/A PC controller software included as standard. Windows 7 & 10 compatible

Package Type

 N/A Each

Units Per Package

 N/A 1

Display

 N/A Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light

Width

 N/A 5.11 in

Height

 N/A 13 in

Depth

 N/A 7.2 in

N/A Operating Manual, Filter, Connecting Plate, Wall Mount Plate, PC Controller Software

N/A SV-3 solenoid valve adds 3 additional calibration gas inputs
AC adaptor (15 W output), AC adaptor (100 W output)
Calibration Station utility software
Calibration gas & regulators
Tubing
Battery powered printer

N/A Standard setting values
AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec
Threshold value: ±50%, Auto Calibration: OFF, Auto alarm
function check: ON
Auto print: OFF
Setting range
AIR Flush time: 15 to 120 sec
GAS time: 20 to 120 sec
AIR Purge time: 5 to 120 sec
Threshold value: ±10 to 50%
Auto calibration: ON, OFF
Auto alarm function check: ON, OFF
Auto print: ON, OFF
Bump test result: Displayed on TFT liquid crystal

N/A Standard setting values
AIR Flush time: 30 sec, GAS time: 90 sec, AIR Purge time: 30 sec
Auto alarm function check: ON, Auto print: OFF
Setting ranges
AIR Flush time: 15 to 120 sec
GAS time: 20 to 120 sec
AIR Purge time: 5 to 120 sec
Auto alarm
function check: ON, OFF
Auto print: ON, OFF
Calibration result: Displayed on touch screen display

N/A Stand-Alone Station

  • Stand-alone station (no PC Required)
  • Charge, calibrate, bump test, and alarm test
  • Included software collects calibration, bump test, alarm history, and exposure date from instruments
  • Automatically power instruments on/off for scheduled calibration
  • Accepts GX-6000 with or without rubber boot

N/A Modular Design

SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralized in one network location accessible by anyone with the PC Controlled software with access to the network location.

N/A Module Design

  • Simultaneously bump / calibrate, charge, and collect data up to 10 instruments
  • No tubing, adaptors or wires needed to connect
  • One power source for all stations
  • Configure GX-6000 parameters
  • Centralize instrument data from multiple stations and locations to one network location
  • Ethernet port for LAN connectivity
  • Schedule automatic calibration / bump test
  • Optional valve expansion module for up to six gas cylinders
  • Optional battery operated printer

N/A Specifications subject to change without notice.